Troubleshooting Garmin Approach G10 Issues

Refer to the steps given below to troubleshoot your Garmin Approach G10.

  • If you find that your Garmin device is freezing, turn it off and turn it on. You can now soft reset the device by pressing the Power button.
  • Secondly, delete all the corrupt files from the Garmin Approach G10 device. Here’s how to do it.
  • Connect the Garmin device to your computer and open it as a storage device.
  • Now, open the Garmin folder and then choose the Data folder.
  • You’ll find the Scorecards folder. Now, delete it. It resolves the problem.
Garmin Approach G10 Troubleshooting

Restoring the Approach Default Settings

  • You can hold the Up button until the device powers down. Next, press and hold the Back and OK buttons.
  • Next, press Power until the Garmin device starts. Do not stop holding the Back and OK buttons.
  • After a few seconds, release the OK button.
  • Next, release the Back button. By doing so, the device will start functioning properly.
  • If the Approach G10 device is not recognized by the computer as a drive, refer to the steps given below to resolve the problem.

  • Power off the device. Next, press and hold the OK button.
  • Now, you can plug the device into the computer and continue to hold the OK button.
  • Later, release the OK button.
  • You can now delete the Scorecards folder and then unmount the device from the computer.
  • Finally, power on the Garmin Approach G10 device.
  • Clean the device whenever possible.

You’ve now seen the Garmin Approach G10 troubleshooting. Hope the information is useful.